 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HE Series High Voltage Reed Relays for PCB Mounting MEDER electronic DESCRIPTION High voltage Reed Relays for PCB mounting suitable for switching up to 7.5 kVDC and breakdown voltage up to 10 kVDC. This series is available with high voltage cables. Standard relays available in 1 Form A and 1 Form B switching configurations. FEATURES * * * * * Power switching up to 50 W available Special pin outs available 1 Form A and 1 Form B are standard Various case sizes and cable lengths available > 26 mm spacing between contact and coil available APPLICATIONS * High voltage test sets * Cable testers * Medical equipment (RF surgery) All dimensions in mm [inches] DIMENSIONS www.meder.com 148 MEDER electronic HE Series High Voltage Reed Relays for PCB Mounting PIN OUT 83 HExx-1A-83 83 HExx-1A83-03 HExx-1B83xx* HExx-1B83-150 * Version 2A available. ORDER INFORMATION Part Number Example HE12 - 1A83 - 02 12 is the nominal voltage 1A is the contact form 83 is the switch model 02 is the pinout Series HE Options Nominal Voltage XX 05, 12, 24 Contact Form XX 1A 1B Switch Model XX 83 Pin Out 02. 03, 150 150 www.meder.com 149 HE Series High Voltage Reed Relays for PCB Mounting MEDER electronic RELAY DATA All Data at 20 C Contact Ratings Switching Power Switch Model Contact Form Conditions Any DC combination of V & A not to exceed their individual max.`s DC or peak AC DC or peak AC DC or peak AC w/ 0.5 V & 10mA 100 volts applied Voltage applied for 60 sec. min. Measured w/ nominal voltage Measured w/ no coil suppression at 10 kHz cross contact Switch 83 Form A / B Min. Typ. Max. 50 Unit W Switching Voltage Switching Current Carry Current Static Contact Resistance Insulation Resistance across Contacts Breakdown Voltage across Contact Operation Time incl. Bounce Release Time Capacitance Life Expectancies Switching 5 V - 10 mA 7.5 3.0 5.0 150 1010 1012 10 10 kV A A m kVDC 3.0 1.5 0.8 5.0 ms ms pF DC only & <10 pF stray cap. 50 106 Cycles For other load requirements please see our life test section. Environmental Data Shock Resistance Vibration Resistance Ambient Temperature Stock Temperature Soldering Temperature 1/2 sinus wave duration 11 ms From 10 - 2000 Hz 10C/ minute max. allowable 10C/ minute max. allowable 5 sec. -20 -35 30 10 70 105 260 g g o C C C o o www.meder.com 150 MEDER electronic HE Series High Voltage Reed Relays for PCB Mounting COIL DATA Contact Form Switch Model Coil Voltage VDC Nom. 5 Max. 7.5 16 30 7.5 16 30 Min. 45 225 900 90 360 1350 Coil Resistance Pull-in Voltage VDC Max. 55 275 1100 110 440 1650 Max. 3.5 8.4 18 3.5 8.4 18 Drop-out Volage VDC Min. 0.75 1.8 3.5 0.75 1.8 3.5 Nominal Coil Power mW Typ. 500 575 575 250 360 385 All Data at 20 C Typ. 50 250 1000 100 400 1500 1A 83 1B * 12 24 5 12 24 The pull-in / drop-out voltage and coil resistance will change at rate of 0.4% per C. * Re-closure of Form B may occur if the max. coil voltage is exceeded. Coil polarity on Form B must be observed. www.meder.com 151 |
Price & Availability of HE05-1A83-02
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |